Ultrasonic Water Meter

♦0-50℃ temperature compensation and a heating device is installed on the transducer, which automatically heats when the temperature is below 10°C, ensuring normal measurements in extremely low-temperature or icy conditions ♦ Low power consumption: <100mA ♦Measurement results are not affected by obstacles ♦With lightning protection, surge protection, and overcurrent protection

◆ Low starting flow rate, minimum flow rate 1/3 of traditional water meter. ◆ Water temperature detection, low temperature alarm. ◆ No moving part, no wear, long term stable operation. ◆ Above 10 years shelf life. ◆ Installation at any angel, no influence for measurement accuracy. ◆ Ultrasonic signal quality detection. ◆ Photosensitive button, IP 68 design, longtime under water working. ◆ Support optical, RS485 and wired & wireless M-bus communication interfaces. ◆ Complies to MODBUS RTU and EN 13757 communication protocol. ◆ Compile to drinkable water standard requirement.